SPNO contact : Type ZE
Uses: Low voltage, high sensivity Main applications: Electronic printed circuit. This pressure switch is more sensible than snap action models and can be calibrated at lower pressure values. Very small differential. Membranes: EPDM, dia 22 mm. Silicone or NBR on request Fluid: water or air Fitting: Plastic Pressure: positive Housing: PA66, UL94 VO Contact: single pole normally open, slow make. Electrical rating: - Silver contact: max 1A 250V - Gold plated contact: max 100 mA, 24V Action: momentary, close on pressure rise. Set point calibration: factory calibrated and sealed, not field adjustable Set point calibration limits: standard calibration 50mbar, other values are achievable from 20 to 400 mbar Electrical connection: printed circuit terminal, dia 1 mm, 12.7mm spacing Maximum pressure: 2 bars (29 PSI) Ambient temperature limits: 0 to 85°C
Available pressure inlet fittings 1
References ( with calibration at 50 mbar): | |||||
Pressure inlet | Silver contact | Gold plated contact | |||
1/8’’ NPT | ZE2X28F105000000 | ZE2X28FG05000000 | |||
1/4’’BSPP | ZE2X2QF105000000 | ZE2X2QFG05000000 | |||
M10 x 1 | ZE2X2MF105000000 | ZE2X2MFG05000000 | |||
Snap in fitting, 2 grooves dia 7.8 | ZE2X2TF105000000 | ZE2X2TFG05000000 | |||
Snap in fitting, 1 groove dia 10 | ZE2X2ZF105000000 | ZE2X2ZFG05000000 | |||
Snap in fitting, 1 spout dia 6 mm | ZE2X2AF105000000 | ZE2X2AFG05000000 |
Other set point values: replace 050 in the product reference by the requested value in mbar