Blue Ink is member of Ultimheat Alliance Controls and heating equipments
Blue Ink is member of Ultimheat Alliance Controls and heating equipments
Select language
Blue Ink is member of Ultimheat Alliance Controls and heating equipments
Blue Ink is member of Ultimheat Alliance Controls and heating equipments
Parameters adjustment
This electronic thermostat for incorporation has been designed to replace electromechanical thermostats. It is mounted with two screws M4 at the same distance 28 mm, uses a 6mm dia. shaft with 4.6mm flat with the same length, and its rotation angle is 270 °. The temperature ranges are the same as the bulb and capillary thermostats, which he can use the graduated knobs. Its electrical rating (16A) is identical. It additionally features adjustable temperature differential, and heating or cooling relay output setting, and control or manual reset action can be set.
Action: On-OFF
Temperature sensors: - NTC thermistor, 10Kohms @25°C, B(25-50)= 3380, for temperatures ranges
from -30°F (-35°C) to 250°F
(120°C).
- NTC thermistor, 500K@25°C, B(25-50)= 4260, for temperature ranges 120-390°F (50-200°C) and 120-570°F
(50-300°C).
Accuracy: +/-1% of scale (NTC sensor tolerances not included)
Size: 60 x 43 x 23 mm
Temperature adjustment ranges: Temperature range selection is made by dip switch on the printed circuit. 270° angulation set span Control or manual reset selection: can be selected with a miniature dipswitch on the circuit
Power supply:90 to 240V, 50Hz or 60Hz
Relay output:SPNO, 16A250V res., 100000 cycles
Relay action: Heating or cooling, open or close on temperature rise output relay action can be selected by a dip switch with access from front ide
Ambiant: -20+50°C, 10-85% RH
Power: <2W
Electrical connections:- Power supply and power relay: 2.5 mm² screw terminal
- Temperature sensor: 1.5 mm² screw terminal
- Manual reset: with miniature JST connector
Adjustment shaft: the thermostat is shipped with a dia. 6mm with 4.6 mm flat shaft, length 11 mm, assembled.
Included spare parts: a 28 mm shaft and a screw driver adjustment shaft.
Standards: Comply with EMC (CE), ROHS and Reach
Reference: 2PE2N6
Temperature differential: Adjustable, by potentiometer
with front access
| Temperature adjustment ranges °C (°F) |
Differential adjustment °C (°F) |
| -35+35°C (-30+95°F) | 0.5~5.5°C (0.9~10°F) |
| 0-10°C (32-50°F) | 0.5~2.5°C (0.9~4.5°F) |
| 4-40°C (40-105°F) | 0.5~2.5°C (0.9~4.5°F) |
| 30-90°C (85-190°F) | 0.5~5.5°C (0.9~10°F) |
| 30-110°C (85-230°F) | 0.5~5.5°C (0.9~10°F) |
| 50-200°C (120-390°F) | 0.5~5.5°C (0.9~10°F) |
| 50-300 °C (120-570°F ) | 1~10°C (1,8~18°F) |
Manual reset switch
Wired switch for manual reset. Needs a 10 mm dia. hole in the mounting board.
Reference : 2PMR100 (L=100 mm). Other length on request
66MZ006350352FW
66MZ006100402FW
66MZ0060040402FW
66MZ0060300901FW
66MZ0060301101FW
66MZ0060502001FW
66MZ0060503001FW
66MZ006350352FW
66MZ006100402FW
66MZ0060040402FW
66MZ0060300901FW
66MZ0060301101FW
66MZ0060502001FW
66MZ0060503001FW
Dimensions
References : 66MZ……
Material: PC + Santoprene
References : 66EN1
Material: Black ABS
References : 66EN3
Material: Chrome plated ABS
References : 66EN3
Material: Chrome plated ABS
References : 66EN2
Material: Stainless steel
Many other knobs are available, see last section of this catalogue
All ranges from -35°C to +110°C (-30+230°F)
10Kohms @25°C, B= 3380
Accuracy: +/-2,5% on R25 e+/-2% on B
Temperature range: -20°C+120°C
Probe: Nickel plated copper, 6x30 mm
Cable: FEP, T200°C, length 2m
Polarity: non polarized
ReferenceTNR60030C20001F
Ranges 50°C-200°C(120-390°F) and 50°C-300°C (120-570°F)
500K@25°C, B(25-50)= 4260
Accuracy: +/-2,5% on R25 e+/-2% on B
Temperature range: ambient to 300°C (570°F)
Probe: stainless steel, 4x30 mm
Cable: FEP, T200°C, length 2m
Polarity: non polarized
ReferenceTMR40030C20001F
