Blue Ink is member of Ultimheat Alliance Controls and heating equipments

Blue Ink is member of Ultimheat Alliance Controls and heating equipments

Select language
Blue Ink division of JPCI Controls Flexible heaters and Controls
Blue Ink division of JPCI Controls Flexible heaters and Controls

Controls, Components, Heating equipments

ULTIMHEAT 2015 New products

Dia. 10 mm cartridge thermostat with ½" or M14x1.5 fitting, calibration from 50 to 120°C
Type 72

Main features

Probe material: 304 stainless steel sheath diameter 10mm, with AISI 304 fitting

Calibration temperature: 50 to 120°C（100 pcs MOQ applicable for specific values).

Tolerance on the opening temperature: ± 5°C

Fittings: 1/2 "BSPT (tapered) or M14x150 with gasket seat.

Immersed length (L1): Standard 90mm and 170mm (50, 230, 300mm on request)

Protection: IP65, IK10.

Pressure resistance: 25 bars.

Part sensitive to temperature: Located at the end of the sheath, on 35mm.

Contact: open by temperature rise. (Close on temperature rise possible on creep action models)

Electrical rating:
- PLC temperature alarm version: plated contact, creep action, 8A resistive in 12V/24V DC 60,000 cycles, differential less than 2°C.
- Thermal safety version: snap action silver contact, 2A, 250VAC, 100,000 cycles, differential higher than 10°C.
Cable outlet: 17x55mm PA66 overmolding.
Connection: H05VV F, 2 x 0.75 mm² cable, standard length 1m. (Connectors on cable end possible on request)

Main references with 1 meter cable (L2)