Blue Ink is member of Ultimheat Alliance Controls and heating equipments

Blue Ink is member of Ultimheat Alliance Controls and heating equipments

Select language
Blue Ink division of JPCI Controls Flexible heaters and Controls
Blue Ink division of JPCI Controls Flexible heaters and Controls

Controls, Components, Heating equipments

ULTIMHEAT 2015 New products

Combination of adjustable set point thermostat and manual reset high limit, IP54 commercial housing, types Y06 (With ½”BSPT nickel plated brass pocket) and Y07 (AISI 304 pocket, ½”BSPP)

Application

Temperature control and safety on storage water heaters, solar heating tanks, boilers

Housing: IP54, 105 x 88 x 58.5 mm, (Cap, accessories and cable gland not included), black PC-ABS, UL94V0. High impact and UV resistance. Product including an adjustable temperature control thermostat and a fixed setting high limit manual reset thermostat. Manual reset has access from outside, by removing a cap.

Electrical input: two M20 cable glands.

Temperature Adjustment: Inside, with °C printed knob. (°F printed knobs available in option)

Sensing element: Liquid filled bulb, located inside a backside mounted nickel plated brass pocket.

Adjustment ranges: - 0-60°C (32-140°F) ; 30-90°C (85-195°F); 30-110°C (90-230°F)

Pocket length (L): 205mm (standard), 170, 300, 450 and 600mm on request

Electrical connections: screw terminals

Mounting:
-Y06: by the ½”BSPT (taped) brass pocket fitting
-Y07: by the ½”BSPP (parallel) brass pocket fitting

Control thermostat contact: SPDT

-Open on temperature rise contact (C-1) 16A(2.6) 250VAC
-Close on temperature rise contact (C-2) 6A(0.6) 250VAC
-Electrical life > 100.000 cycles.

Manual reset thermostat contact: Failsafe, open by temperature rise; 16A (2,6) 250V alt

Options:
-Power supply “energized” pilot light (Neutral is mandatory, and thermostat contact is open on rise only, not SPDT). Other pilot light wirings are possible on request.
-Liftable adjustable high end adjustment on control thermostat.
- Outside access to the control thermostat adjustment (By removing a 40mm dia. cap)
-Thermal cut out incorporated inside the pocket.
-These products can be made without pocket, for special customer applications and incorporation

Main references (with 205mm pocket)

Aisi 304 pocket: replace Y06 by Y07. Versions with °F printed knobs: replace S by T or E by G in the reference Knob and dial printings