HOME COMPARISION OF FLAT HEATER EXISTING TECHNOLOGIES HOW TO ORDER CONTACT US & LOCATION DISTRIBUTORS & AGENTS WARRANTY & SALES CONDITIONS
PRODUCT LIST
  • Flexible Rectangular Silicone Heaters
  • Anti Freeze Band Heaters
  • Band Heaters
  • Silicone Band Drum Heaters
  • Flexible Jacket Heater
  • ACCESSORIES
  • Accessories and Options
  • Temperature Controls and Safety Devices
  • PRICE REQUEST
  • Standard Sizes price
  • Made-to-Order

  • ULTIMHEAT : Digital display electronic controller. Type 2DN


                                            
    Main features
    This electronic temperature controller with the simplest and the most instinctive setting by end user was designed for easy incorporation inside cabinets with DIN rail mounting.
    It can be used by untrained operators.
    It provides simple On Off action temperature control.
    End user has access to set point and differential setting only.
    It is possible to set °C or °F display, heating or cooling relay output, decimal display, sensor type and temperature range by internal Dip switches (Without access by end user).
    Adjustment of maximum temperature can be set without need to open the control.
    Dimensions: 86.9 x 58 x 52.5 mm
    Display: 3+1 digit LED. The fourth digit is used to display °C or °F, upon setting made.
    Set point setting: In normal use, the display shows measured temperature. Push “+” or “-” keys will display the set point value, and at that time it can be adjusted with “+” and “-” keys. No action during 5 seconds will register the new set point value and bring back display to measured value.
    Temperature differential setting: In normal use, the display shows measured temperature. Push “D” key will display the differential value, at that time it can be adjusted with “+” and “-” keys. Push “D” again or no action during 5 seconds will register the new differential value and bring back display to measured value.
    Action: On-OFF
    Temperature sensor: Pt100 (2 or 3 wires) or NTC 10Kohms @25°C, B= 3380 (2 wires) Temperature sensor can be selected by a dip switch on circuit (No access to final user)
    Accuracy: +/-1% of scale
    Temperature adjustment ranges:
    - 30+120°C (-20+250°F), with 1° display
    - 30,0 to +40,0°C (-20,0 + 99,9°F), with 1/10° display
    - 30+400°C (-20+750°F), with 1° display
    Temperature range and decimal digit can be selected by a dip switch on circuit (No access to final user)
    Power supply: 90 to 240V, 50Hz or 60Hz
    Relay output: SPNO, 16A250V res., 100.000 cycles. Output Led displays relay position.
    Relay action: Heating or cooling, open or close on temperature rise output relay action can be selected by a dip switch on circuit (No access to final user)
    °C or °F display: can be selected by a dip switch on circuit (No access to final user)
    Maximum possible set point adjustment by user: Push “D” button more than 10 seconds, display shows the maximum temperature that can be set by user. Then it is possible to adjust this value with “+” and “-“. push again on “D” or do nothing during 5 seconds will register the maximum possible setting value and control will comes back to measured valued
    Ambiant: -20+60°C, 10-90% RH
    Power: <4W
    Fail safe safety:
    - If no power supply, relay output contact will open
    - If Pt100 sensor or NTC is broken or not connected properly, relay output contact will open and display will show “EEE”
    - If measured temperature is higher than allowed by the set range, display will show “HHH”
    - If measured temperature is lower than -30,0°C or -20,0°F, display will show “LLL”
    Electrical connections:
    - Power input: Neutral, phase, ground, with 2.5 mm² terminals
    - Power output: Neutral, phase, ground, with 2.5 mm² terminals for direct connection to the load.
    - Temperature sensor: three 2.5 mm² screw terminal
    One removable jumper provides a potential free relay output for applications needing a separate circuit for relay, external timer or other.
    Internal parameters setting: Process is given on request to approved distributors. This allows to store only one product and set parameters upon end user request.
    Standards: Comply with EMC (CE), ROHS and Reach
    Main references
    References Temperature range Sensor Display Relay Output
    2DNAP6FA -30+120°C NTC 888C (°C) Heating
    2DNAP6FB -20+250°F NTC 888F (°F) Heating
    2DNAP6FC -30+120°C NTC 888C (°C) Cooling
    2DNAP6FD -20+250°F NTC 888F (°F) Cooling
    2DNAP6FE -30, 0 to +40, 0°C Pt100 88.8C (°C) Heating
    2DNAP6FF -20,0 + 99.9°F Pt100 88.8F (°F) Heating
    2DNAP6FG -30, 0 to +40, 0°C Pt100 88.8C (°C) Cooling
    2DNAP6FH -20,0 + 99.9°F Pt100 88.8F (°F) Cooling
    2DNAP6FI -30+400°C Pt100 888C (°C) Heating
    2DNAP6FJ -20+750°F Pt100 888F (°F) Heating
    2DNAP6FK -30+400°C Pt100 888C (°C) Cooling
    2DNAP6FL -20+750°F Pt100 888F (°F) Cooling
    2DNAP6F0 No internal setting made, sold only to approved distributors.
     
    Standard temperature sensors (For more models see catalogue N°3)
    NTC Thermistor
    Value: 10Kohms @25°C, B= 3380
    Accuracy: +/-1% on R25 and +/-1% on B
    Temperature range: -20°C+120°C
    Probe: Nickel plated copper, 6x30 mm
    Cable: FEP 200°C, length 2 m
    Polarity: non polarized
    Reference TNR60030C20001F
    Pt100, 3 wires
    Accuracy and tolerances: Class B, ±0.3°C @ 0°C. (±0.12 Ω @ 0°C).
    Temperature range: -50°C, +200°C
    Probe: Stainless Steel 304, dia. 5 mm x 30 mm
    Cable: - 3 x 0.35 mm², FEP insulation, braided +FEP, T 200°C, OD 2.7 mm
    Polarity: The two red wires are connected together at their welded junction to one of the sensing element terminal and the white wire is connected to the other terminal.
    Reference TSR50030I2000BK6

    Download PDF
    Access full catalogue



    *ULTIMHEAT ® is a registered trademark
    Various types of Heaters :Flexible Rectangular Silicone Heaters / Anti Freeze Band Heaters / Band Heaters / Silicone Band Drum Heaters / Flexible Jacket Heater / Accessories and Options
    Temperature Controls and Safety Devices: Creep action fixed setting strip thermostat / Snap action fixed setting strip thermostat / Snap action fixed setting disc thermostat / Thermal Fuses / Thermocouple / Resistance Temperature Devices (RTD) / Bulb and Capillary Control/ Bimetal surface control/ Remote bulb thermostat/ Remote electric temperature control

    Blue Ink Company Limited
    Silicone Flexible Heating Surface Heater Manufacturer and ULTIMHEAT Product Distributor in Thailand and ASEAN
    Morning Dew Building, 41/3 – 41/4 Soi Sukhumvit46 Sukhumvit Rd. Phrakanong Klongtoey Bangkok 10110 Thailand
    Tel. +66(0)27135196 / Fax. +66(0)27135197
    E-mail: infoblueink@ultimheat.com / Website: www.ultimheat.co.th