HOME COMPARISION OF FLAT HEATER EXISTING TECHNOLOGIES HOW TO ORDER CONTACT US & LOCATION DISTRIBUTORS & AGENTS WARRANTY & SALES CONDITIONS
PRODUCT LIST
  • Flexible Rectangular Silicone Heaters
  • Anti Freeze Band Heaters
  • Band Heaters
  • Silicone Band Drum Heaters
  • Flexible Jacket Heater
  • ACCESSORIES
  • Accessories and Options
  • Temperature Controls and Safety Devices
  • PRICE REQUEST
  • Standard Sizes price
  • Made-to-Order
  • ULTIMHEAT Technology Flat Heaters : Anti freeze Band Heaters

    Anti freeze band heaters
    Anti freeze
    Main Features

    ULTIMHEAT silicone heating elements are made of laminated silicone rubber sheets, vulcanized together through heat and high pressure on both sides of an embedded wire wound heating element. Fiberglass-reinforced silicone rubber gives heater dimensional stability without sacrificing flexibility. Silicone is used because of its high temperature resistance (permanent temperature up to 200°C (390°F), high thermal conductivity (~7 10-4 W/cm.K) and good electrical insulation properties (~12KV/mm)
    A fiberglass grid, which is visible under the surface, reinforces the silicone rubber sheets. The wire wound heating element web covers the entire surface of the heater. This construction makes silicone rubber heaters an ideal solution to the requirements of many low and medium temperature applications with small sizes or complicated pattern. Their flat shape and small thickness make them highly appreciated for small diameter pipes, without need to modify the existing foam insulation.

    Main applications

    Silicone flexible band deicing heaters are designed to provide freeze protection to metallic and plastic piping, valves, pumps, water meters and are usually wrapped around the equipments or fixed axially under the pipe insulation foam with cable ties or adhesive tape. We recommend 10 mm thickness insulation foam for pipes up to 24 mm and 20 mm for diameters over this size.

    Technical Features

    Length: 800 mm to 2000 mm,+/- 5 mm (32" to 80" +/- 3/16)
    Width: 25 mm +/- 1.5 mm (1"+/- 1/16)
    Standard heater thickness without adhesive, cable output and thermostat over-molding not included: 1.60 mm +/- 0.15 mm (0.065 inch +/- 0.005") .\Add 0.1 mm (0.005") to above dimensions for adhesive foil backing.
    Maximum total thickness over cable output: 4.6 mm
    Maximum total thickness over thermostat: 17 mm Silicone foil minimum bending radius: 0.125" (3.2 mm)
    Standard Weight: 0.24 gr/cm² 240 g/m² (8 oz./ft²) + cable and thermostat
    Ingress protection: IP65
    Maximum operating temperature*: the silicone foil can withstand peak 230 °C (446 °F), continuous: 200 °C (390 °F), but these temperatures cannot be reached if these heaters are used on water pipes and according to installation instructions
    Minimum ambient temperature on the heater: -60 °C (-80 °F)*
    *These maximum and minimum temperatures apply to silicone heaters only. Restriction apply for controls and cables

    Voltage: 12V to 240VAC
    Resistance tolerance: -5%/+10% (tighter tolerances are achievable)
    Power tolerance: -10% to + 5%
    Watt density: The limitation factor is the heating foil and pipe maximum acceptable temperature. This temperature is dependent upon three factors: 
    - Temperature exchange with ambient or surface
    - The maximum operating temperature 
    - Heater temperature control
    Standard watt density:
    -0.05 w/cm² (0.32 w/inch²).  
    -0.1 w/cm² (0.64 w/inch²).  Warning: When used on plastic pipes or foam insulated pipes, do not use higher than 0.1w/cm² (0.64 w/ inch²) watt density to avoid melting plastic pipes or pipe foam insulation.
    -0.2 w/cm² (1.3 w/inch²).
    Built in thermostat: They are equipped with one ambient temperature thermostat, which will start heating automatically when ambient temperature goes down to 5 °C +/- 3 °C. Thermostat sensing surface must be outside insulation.
    Quality control routine tests: Each element is 100% tested for continuity, resistance and insulation. Tests are made  according to EN 60335-1 and EN 50106 standards
    Dielectric Strength: 1500V AC, 2s, 0.5 mA (single insulation models) or the typical approval agency recommendation of 2 x input voltage +1000 volts. 
    Insulation resistance: More than 10 Mohms
    Surface temperature:
     Temperature that the silicone rubber heater will attain when suspended in still air at 70 °F (20°C) depends of the watt density.

    Surface temperature after stabilization /watt density

    W/cm²

    0.05

    0.10

    0.15

    0.20

    0.30

    0.40

    0.45

    0.50

    0.60

    0.70

    0.8

    0.9

    1.0

    Stabilization Temperature °C

    40

    70

    90

    105

    135

    165

    175

    190

    210

    230

    250

    260

    270

    W/inch²

    0.32

    0.64

    0.97

    1.3

    1.9

    2.6

    2.9

    3.2

    3.9

    4.8

    5.2

    5.8

    6.5

    Stabilization Temperature °F

    104

    158

    194

    221

    275

    329

    320

    347

    410

    446

    482

    500

    518


    Electrical connection:  HO3VVH2F 2 x 0.5 mm² (equivalent to AWG 20), PVC insulated cable, maximum voltage 300V, flexible stranded plated copper wire, with or without over-molded plug.  Length 1 meter.  Temperature limits on the cable: -5+60°C.


    Electrical connection options

    A21

    A22

    A23

    2 x 0.5 mm² (AWG20) Flat cable  without plug

    2 x AWG 20 Flat cable  with UL plug

    HO3VVH2F 2 x 0.5 mm² Flat cable  with 2.5 A  Euro plug

    Main references

    Standard flexible silicone deicing band  Heaters :
    5°C Ambient disc thermostat, 1m PVC insulated cable, horizontal output, 0.05 to 0.2 w/ cm² (0.32  to 1.3 w/inch² )


    Rectangular heater main references, 0.05 w/cm² (0.32 w/inch2). 
    (Click on reference to download drawing)

    reference

    Width mm

    Width inches

    Length mm

    Length inches

    Power Watts

    voltage

    Cable style

    9ADC25H08009FB00PDF

    25

    1,0

    800

    31,5

    9

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25J08012FB00PDF

    25

    1,0

    1000

    39,4

    12

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25O08018FB00PDF

    25

    1,0

    1500

    59,1

    18

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25T08024FB00PDF

    25

    1,0

    2000

    78,7

    24

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25H05009FT00PDF

    25

    1,0

    800

    31,5

    9

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25J05012FT00PDF

    25

    1,0

    1000

    39,4

    12

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25O05018FT00PDF

    25

    1,0

    1500

    59,1

    18

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25T05024FT00PDF

    25

    1,0

    2000

    78,7

    24

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    Accessory
    Reinforced high temperature aluminum adhesive tape Reference: 96ALTA0550

    Rectangular heater main references, 0.1 w/cm² (0.64 w/inch2).
    (Click on reference to download drawing)

    reference

    Width mm

    Width inches

    Length mm

    Length inches

    Power Watts

    voltage

    Cable style

    9ADC25H08019FB00PDF

    25

    1,0

    800

    31,5

    19

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25J08024FB00PDF

    25

    1,0

    1000

    39,4

    24

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25O08036FB00PDF

    25

    1,0

    1500

    59,1

    36

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25T08049FB00PDF

    25

    1,0

    2000

    78,7

    49

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25H05019FT00PDF

    25

    1,0

    800

    31,5

    19

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25J05024FT00PDF

    25

    1,0

    1000

    39,4

    24

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25O05036FT00PDF

    25

    1,0

    1500

    59,1

    36

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25T05049FT00PDF

    25

    1,0

    2000

    78,7

    49

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    Rectangular heater main references, 0.2 w/cm² (1.3 w/inch2)
    Warning: Not recommended on most of plastic pipes or surfaces 
    (Click on reference to download drawing)

    Reference

    Width mm

    Width inches

    Length mm

    Length inches

    Power Watts

    voltage

    Cable style

    9ADC25H08038FB00PDF

    25

    1,0

    800

    31,5

    38

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25J08048FB00PDF

    25

    1,0

    1000

    39,4

    48

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25O08073FB00PDF

    25

    1,0

    1500

    59,1

    73

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25T08098FB00PDF

    25

    1,0

    2000

    78,7

    98

    220/230

    2 x 0,5 mm²,  H03-VVH2, no plug

    9ADC25H05038FT00PDF

    25

    1,0

    800

    31,5

    38

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25J05048FT00PDF

    25

    1,0

    1000

    39,4

    48

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25O05073FT00PDF

    25

    1,0

    1500

    59,1

    73

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    9ADC25T05098FT00PDF

    25

    1,0

    2000

    78,7

    98

    110/115

     2 x AWG20 cable, PVC insulated, style 2664, no plug

    Adhesive backside: for application on various surfaces such as glass, steel, plastic replace the last character (0) by (A)

    Warning: 
    - Silicone rubber heaters are not suitable for: radiation, vacuum, or prolonged exposure to oil 
    - When these bands are used on thermally insulated pipes, they must be installed under the insulation and always in contact with the pipe surface. We recommend fixing them on the equipment with armed adhesive tape or cable ties

    Design Services:
    Our experienced designers can assist in your design efforts to build a surface heater specifically for your application. In addition, we can look to optimize your current element designs and recommend proper watt densities, controls and element construction. We will conduct a thorough design review and present a proposal and quotation, followed by sample elements upon approval. We also provide testing services and gather agency approvals to verify and ensure that the element construction and design will be optimal for your application. 

    Custom designs Protection:
    We protect your intellectual property in confidential fashion. Many of our large clients and ongoing projects are protected with NDA's.

    PDF
    Download Anti freeze band heaters catalog PDF PDF



    *ULTIMHEAT ® is a registered trademark
    Various types of Heaters :Flexible Rectangular Silicone Heaters / Anti Freeze Band Heaters / Band Heaters / Silicone Band Drum Heaters / Flexible Jacket Heater / Accessories and Options
    Temperature Controls and Safety Devices: Creep action fixed setting strip thermostat / Snap action fixed setting strip thermostat / Snap action fixed setting disc thermostat / Thermal Fuses / Thermocouple / Resistance Temperature Devices (RTD) / Bulb and Capillary Control/ Bimetal surface control/ Remote bulb thermostat/ Remote electric temperature control

    Blue Ink Company Limited
    Silicone Flexible Heating Surface Heater Manufacturer and ULTIMHEAT Product Distributor in Thailand and ASEAN
    Morning Dew Building, 41/3 – 41/4 Soi Sukhumvit46 Sukhumvit Rd. Phrakanong Klongtoey Bangkok 10110 Thailand
    Tel. +66(0)27135196 / Fax. +66(0)27135197
    E-mail: infoblueink@ultimheat.com / Website: www.ultimheat.co.th